3M™ LifeASSURE™ cartucho de filtro serie IMC, IMC020F03CC, 30", 0.2 μ, 6/Caja
- 3M ID 7000050612
- UPC 00016145091629
Detalles
Aspectos destacados
- No IPA pre-wetting and system flushing required
- Enhanced contaminant reduction capacity
- Excellent downstream cleanliness out of the package
- Economic alternative to PTFE filter cartridges
Our LifeASSURE™ IMC Series Filter Cartridge is a high efficiency naturally hydrophilic Nylon 6,6 filter elements designed to meet the exacting requirements of deionized (DI) water, critical parts cleaning, and industrial chemical applications.
Utilizing Advanced Pleat Technology (APT), the LifeASSURE™ IMC Filter Cartridge provides enhanced flow characterizes with minimal pressure drop. This filter is available in single and multiple length cartridges with 0.1, 0.2, 0.45, 0.65 and 0.80µm ratings along with various end modifications. The naturally hydrophilic Nylon 6,6 membrane provides low extractable, long filter life and enhanced contaminant reduction. LifeASSURE™ IMC filter cartridges are ideally suited for DI water, critical parts cleaning, and other chemical applications where high efficiency contaminant reductions at 0.1, 0.2, 0.45, 0.65, and 0.80 μm is required.
Applications
- DI water
- Critical parts cleaning
- Chemicals
Especificaciones
| Calificación en micras (absoluta) | 0,2 absoluto, al 99,9 % |
| Calificación en micras (nominal) | 0 |
| Configuración final | Un solo extremo abierto (SOE) |
| Forma del Producto | Cartucho |
| Grado | IMC020 |
| Marcas | LifeAssure™ |
| Material de la junta tórica/de estanqueidad | EPR |
| Material del filtro | Nailon 6,6 |
| Materiales de componentes y montajes | Polipropileno |
| Modificación final | 222 O-ring & spear |
| Presión diferencial de cambio recomendada (métrico) | 2.4 bar @ 25°C |
| Presión diferencial máxima hacia adelante (métrico) | 2.4 bar @ 80°C, 5.5 bar @ 25°C |
| Sectores | Industria |
| Serie | LifeASSURE™ IMC Series |
| Serie de producto | IMC |
| Sometido a pruebas de integridad en fábrica | Sí |
| Tecnología del filtro | Membrana |
| Temperatura de funcionamiento máxima (Celsius) | 80 °C |
| Tipo de Producto | Membrana plisada |
| Tipo de filtro | Surface |
| Tipo de pliegues | Tecnología avanzada de plegado (APT) |
| Unidades por Kit | 6.0 |
| Área de filtración eficaz (métrico) | 3.1 m² |
| Diámetro total | 7 centímetros lineales |
| Longitud total | 76.2 centímetros lineales |
